Decent Home Decor is reader-supported. When you buy through links on our site, we may earn an affiliate commission. However, our editorial content is not influenced by the commission. Learn More.
Is the well-being and upkeep of your Nespresso machine vital to you? Of course, it is! It should be. Never forget this machine brings a delightful morning each day. A lovely rich gold caffeinated bliss is the reason why you stay full of energy the whole day.
I am a hard coffee lover! So, descaling and cleaning is something I always care about. Limescale might clog your machine and this will invite serious harm, so I’m going to tell you how to descale a Nespresso machine with vinegar. I’ll include whatever you need to know for the process. Let’s starts!
You may love to read this as well!> Nespresso Inissia Espresso Machine Review
Making a Vinegar Solution
If you wish to be extra sure about your machine’s care, then making your own cleaning solution will be the best. There are so many methods for cleaning and each of them will need a descaling liquid. It’s important to maintain a 50/50 ratio. Using vinegar is the most popular and prominent option.
Get vinegar of one portion and mix it with a similar ratio of water. Let it sit for five minutes and mix completely. Use warm water for better results. Make a huge amount for the Nespresso, you don’t want any shortage later.
Before Descaling your Nespresso (Prep Up)
Get the descaling kit and let’s jump into the prep up process. First, you need to prepare the machine. The process might be a bit different for various models of machine, so it would be a good idea to read the manual beforehand and be extra cautious.
Eliminate any additional capsules from the machine. Make sure the capsule container is completely empty.
Now, get a proper amount of fresh water, pour it into the water container and mix it with the descaling solution. Here we will use the vinegar solution. You will find out from the manual what amount of mixture this machine needs. Also, you would be able to find out the information from their official Nespresso website.
Now, you need to put a container under the coffee outlet. Make sure it holds up to a liter of water, then simply turn on the machine.
The Main Process
To begin with descaling, you would have to push one or more buttons. This depends on the model of Nespresso you own. For a VertuoLine, holding one button will do the job, press it for seven seconds. On the other hand, for Citiz, Inissia, or Pixie you would have to press two flashing buttons, make sure to press for three seconds. Also, they need to be pressed at the same time. Now, if your machine is Prodigio, then you have to press all three buttons for three seconds.
This is where the main process begins. This stage would take less than ten minutes. There are some machines that will require refilling of water. You would have to place this solution again afterward and repeat the whole process.
Once the running cycle is over, you need to rinse the water container. Just pour fresh water into the container, rerun the cycle once again and wait for another ten minutes. This time you do not need to put any vinegar solution.
Now, eliminate anything remaining on the drip tray and simply rinse it.
Finally, to leave the descaling mode, press the same buttons you pressed at the beginning. Let the Nespresso machine dry for at least ten minutes before using it.
Descaling your machine with white vinegar is okay, it’s a great idea no doubt, but remember you should do it within a limit, vinegar is an acetic acid ingredient. If you use it too frequently it might seriously harm your Nespresso. It can harm the pipes, there might also be damage to the internal mechanism as well as leaks. So, it’s suggested to descale with vinegar after a certain interval of time. Once in every two months will be safe for most machines.
Why is it Important?
Knowing how to descale Nespresso Inissia is really important for so many reasons. If you want to have the longest possible service, then descaling is the answer. My colleague will always say limescale is the worst enemy of a Nespresso machine. This goes the same for capsule machines also.
Limescale tends to appear because of the water we use for coffee. It is something that will always stay within tap water. Once the water is heated, this element separates, next it despots a form inside your machines pipe. It keeps on building up, and sooner or later the extraction pressure will begin to reduce. This is the reason for premature wear on pipes.
Also, another element, calcium, will build up in the interior of the Nespresso machine. This will make the system slow and snatch away the good taste. So, it’s very vital you do descale every two to three months. It depends merely on the hardness of your water.
Many think that the descaling process will need dismantling, this is not true at all. The process is only to keep the Nespresso machine running smooth and give a fluffy coffee every time. So, if you want to take care of both performance and taste, think about descaling the whole machine.
Watch this: Descale your Inissia machine
So, now you know why and how to descale a Nespresso machine. Keep the small notes for caution in mind. Give your machine a good clean up every week, and never make an excuse to leave the machine dirty. Your machine will serve for years, providing rich fragrant coffee every single day. Happy Caffeine!